Summer Time On; Summer Time Off - Bosch Solution 16i User Manual

System > Clock >

Summer Time On

This menu allows you to program when day light
savings start during the year. This will allow the panel to
automatically adjust it's built in clock accordingly. See
the section on Australian daylight savings times for more
information.
To program Summertime On, you will need to set the
month of the year (Jan to Dec), the week of the month
(1 to 5) and the day of the week (Sun to Sat) that daylight
savings starts.
January = Month 1
First Week = 1
Sunday = Day 1
1. Enter [Master PIN] + [MENU]
2. Enter [7] + [1] + [1] + [OK]. Enter the number of the
month that Summer Time starts.
Allowable values are 01 to 12.
3. Enter the number of the week in that month that
Summer Time starts, then press the [→] key.
Allowable values are 01 to 05, where 5 is the last week.
4. Enter the number of the day in the week Summer
Time starts, then press the [→] key.
Allowable values are 01 to 07, where 1 is Sunday.
5. Use the [←] and [→] keys at any time to confirm
programming and then press [OK] to exit.
Australian Daylight Savings Times
At the time of writing this document QLD and the NT do
NOT participate in daylight savings.
In NSW, VIC, ACT, SA and WA daylight savings begins at 2:00
am on the last Sunday in October and ends at 3:00 am DST
on the last Sunday in March.
Daylight Saving Begins
Turn Clock Ahead 1 hr
Sun 28 Oct 2007
Sun 26 Oct 2008
Bosch Security Systems 10/07 BLCC500U FTR1.01
ST-On
MENU 7-1-1
December = Month 12
Last Week = 5
Saturday = Day 7
MM =10
WW =05
dd =01
Daylight Saving Ends
Turn Clock Back 1 hr
Sun 30 Mar 2008
Sun 29 Mar 2009
In Tasmania, daylight savings begins at 2:00am on the first
Sunday in October and ends at 3:00am DST on the last
Sunday in March
Daylight Saving Begins
Turn Clock Ahead 1 hr
Sun 7 Oct 2007
Sun 5 Oct 2008
System > Clock >
Summer Time Off
This menu allows you to program when day light savings end
during the year. This will allow the panel to automatically
adjust it's built in clock accordingly.
To program Summer time Off, you will need to program the
month of the year (Jan to Dec), the week of the month (1 to
5) and the day of the week (Sun to Sat) that daylight saving
ends.
1. Enter [Master PIN] + [MENU]
2. Enter [7] + [1] + [2] + [OK]. Enter the number of the
month that Summer Time ends. (1 to 12).
3. Enter the number of the week in that month that
Summer Time ends.
(1 to 5 where 5 is the last week).
4. Enter the number of the day in the week Summer
Time ends.
(1 to 7 where 1 is Sunday).
5. Use the [←] and [→] keys at any time to confirm
programming and then press [OK] to exit.
Solution16 User Guide
i
Daylight Saving Ends
Turn Clock Back 1 hr
Sun 30 Mar 2008
Sun 29 Mar 2009
St-Off
MENU 7-1-2
MM =03
WW =05
dd =01
27