Summer Time On; Summer Time Off - Bosch Solution 16i User Manual

System > Clock >

Summer Time On

This menu allows you to program when day light savings
start during the year. This will allow the control panel to
automatically adjust it's built in clock accordingly. See
the section on Australian daylight savings times for more
information.
To program Summertime On, you will need to set the
month of the year (Jan to Dec), the week of the month
(1 to 5) and the day of the week (Sun to Sat) that daylight
savings starts.
January = Month 1
First Week = 1
Sunday = Day 1
1. Enter your Master PIN + [MENU.
2. Enter [7] + [1] + [1] + [OK].
3. Enter the number of the month (January = 01 /
December = 12) that Summer Time starts.
4. Enter the number of the week (First Week = 1 / Last
Week = 5) in that month that Summer Time starts.
5. Enter the number of the day in the week (Sunday =
01 / Saturday = 07) Summer Time starts
6. Use the [←] and [→] keys at any time to confirm
programming and then press [OK] to exit.
Bosch Security Systems 6/09 BLCC500U FTR1.03
ST-On
MENU 7-1-1
December = Month 12
Last Week = 5
Saturday = Day 7
MM =10
WW =05
dd =01
Australian Daylight Savings Times
From 2008, the ACT, NSW, South Australia, Victoria
and Tasmania will all start daylight savings on the
first Sunday in October and end on the first Sunday
in April. This will result in an extra month of daylight
savings for the ACT and introduces common start
and finish dates in these states.
For Western Australia, a three year trial of daylight
savings began on Sunday December 3, 2006. A
referendum will be held in 2009 to decide whether it
should become permanent.
Daylight Saving Begins
Turn Clock Ahead 1 hr
Sunday 4 October 2009
Sunday 3 October 2010
System > Clock >

Summer Time Off

This menu allows you to program when day light
savings end during the year. This will allow the panel to
automatically adjust it's built in clock accordingly.
To program Summer time Off, you will need to program the
month of the year (Jan to Dec), the week of the month (1 to
5) and the day of the week (Sun to Sat) that daylight saving
ends.
1. Enter your Master PIN + [MENU].
2. Enter [7] + [1] + [2] + [OK].
3. Enter the number of the month (January = 01 /
December = 12) that Summer Time ends.
4. Enter the number of the week (First Week = 1 / Last
Week = 5) in that month that Summer Time ends.
5. Enter the number of the day in the week (Sunday =
01 / Saturday = 07) Summer Time ends.
6. Use the [←] and [→] keys at any time to confirm
programming and then press [OK] to exit.
Solution 16 User Guide
i
Daylight Saving Ends
Turn Clock Back 1 hr
Sunday 4 April 2010
Sunday 3 April 2011
St-Off
MENU 7-1-2
MM =03
WW =05
dd =01
29