Restoring Factory Default Settings - Huawei eSpace 6810 User Manual

Huawei IP Phone eSpace 6810
User Manual
6
Restoring the factory default settings can clear all configuration information about the eSpace
6810. Back up or print all the settings before you restore factory default settings. Huawei is
not responsible for parameter loss or failier to connect to your VoIP service provider due to
the operation of restoring the factory default settings.
To restore the factory default settings, do as follows:
1.
2.
If digits are duplicate in the MAC address, for example, 22, you need to press RIGHT to move the
cursor or wait for four seconds for typing another 2.
3.
Issue 01 (2011-12-07)

Restoring Factory Default Settings

Press MENU to access the keypad configuration UI menu, and select Config. Press
MENU to access submenus, and select Factory Reset. For details, see
Type the MAC address that is printed on the bottom of the sticker by using the following
rules:
− 0~9: 0~9
− A: 22 (Press the 2 key twice and A is displayed on the LCD.)
− B: 222
− C: 2222
D: 33 (Press the 3 key twice and D is displayed on the LCD.)
−
− E: 333
− F: 3333
For example, if the MAC address is 0018820E3956, type 00188203333956. The LCD
displays the entered MAC address 0018820E3956.
Press the OK soft key.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Restoring Factory Default Settings
Table 4-1.
24