Decode UPC/EAN Supplemental Redundancy
Parameter #0x50
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the
number of times a symbol without supplementals will be decoded before transmission.
The range is from 2 to 20 times. Five or above is recommended when decoding a
mix of UPC/EAN symbols with and without supplementals, and the autodiscriminate
option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric
bar codes beginning on page 78. Single digit numbers must have a leading zero.
If you make an error, or wish to change your selection, scan the CANCEL bar code
on page 80.
DECODE UPC/EAN
SUPPLEMEN TA L REDUNDANCY
26