Set Lengths For Code 93 - Philips Speechmike6284 Configuration Manual

Set Lengths for Code 93

Parameter # L1 = 0x1A, L2 = 0x1B
Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s) the code contains.
One Discrete Length - This option allows you to decode only those codes containing
a selected length. For example, if you select Code 93 One Discrete Length, then
scan 1, 4, only Code 93 symbols containing 14 characters are decoded. Numeric bar
codes begin on page 78. If you make an error, or wish to change your selection,
scan the CANCEL bar code on page 80.
CO DE 93 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing
two selected lengths. For example, if you select Code 93 Two Discrete Lengths, then
scan 0, 2, 1, 4, only Code 93 symbols containing 2 or 14 characters are decoded.
Numeric barcodes begin on page 78. If you make an error, or wish to change your
selection, scan the CANCEL bar code on page 80.
CODE 93 - TWO DISCRETE LENGTHS
53