Set Lengths For Code 39 - Philips Speechmike6284 Configuration Manual

Set Lengths for Code 39

Parameter # L1 = 0x12, L2 = 0x13
Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s) the code contains. If Code 39
Full ASCII is enabled, Length Within a Range or Any Length are the preferred options.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Code 39 One Discrete Length, then scan 1, 4,
only Code 39 symbols containing 14 characters are decoded. Numeric bar codes begin
on page 78. If you make an error, or wish to change your selection, scan the CANCEL
bar code on page 80.
CODE 39 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing
two selected lengths. For example, if you select Code 39 Two Discrete Lengths, then
scan 0, 2, 1, 4, only Code 39 symbols containing 2 or 14 characters are decoded.
Numeric bar codes begin on page 78. If you make an error, or wish to change your
selection, scan the CANCEL bar code on page 80.
CODE 39 - TWO DISCRETE LENGTHS
47