Change Pin; System Setting; Tv Standard; Display Type - Silvercrest LT 710 User Manual And Service Information

SilverCrest LT 710

Change PIN

Here you can change the preset PIN code. To do so enter the old PIN into
the "Old PIN" field. Next enter a new PIN code into the "New PIN" field. Enter
the same PIN code again into the "Confirm New PIN" field. Navigate to the
"OK" button and then press OK (20). The new PIN code will be saved.
After you have changed the PIN code keep it at a safe place.
For resetting the device to the factory-default configuration
you will also have to enter the PIN code.

System Setting

With System Setting you can change the display properties of your device.
Several options are available.

TV Standard

Select from the TV systems PAL or NTSC according to the country you are
located in. If you are unsure about the proper setting, select AUTO. In this
case the device will detect the required TV standard automatically.

Display Type

Here you can choose between 16:9 (wide screen) and 4:3 (normal aspect
ratio) screen formats. Because of the widescreen format of the unit's display
it is recommended to use the 16:9 setting.

Regional Setting

With Regional Setting you can customise your device to the country where it
will be used. Selecting the country sets the language and the time zone. You
can change both settings later, if required.
English
23