Language; Set Time; Accessory; System Information - Silvercrest LT 710 User Manual And Service Information

English

Language

Set the desired language for the menus (OSD Language), for the left stereo
channel (1st Audio Language), for the right stereo channel (2nd Audio
Language) and for the DVB-T subtitles.
The availability of the different audio channels and subtitles
depend on the received station and programme.

Set Time

The time can be set manually or be synchronised automatically from the
received digital signal.
Select "ON" for the "GMT usage" option to have the date and time set
automatically. You only need to select the proper time zone for it.
Select "OFF" for the "GMT usage" option to set the date and time manually.
Press the direction buttons (7, 8, 9, 19) to move to the "Set Date" option.
Enter the date via the numeric keys (11) in Day/Month/Year format. Proceed
the same way for the "Set Time" option.

Accessory

System Information

Shows information about the current software of the device.

Factory Default

With this option you can restore the factory-default settings of your device.
This option is protected by PIN code. Enter your four-digits PIN code and
press the OK button (20) to confirm. Then select "NO" or "YES" to confirm if
set the factory default or not when prompted. Finally confirm the following
safety prompt again with "OK" or select "Cancel" to quit without making any
changes.
Restoring the factory-default configuration will erase all
custom settings and the device will be reset to the first-time
setup status. When powering it on the next time, the setup
wizard (see page 15) will launch automatically.
24
SilverCrest LT 710