Brother MFC-8510DN User Manual page 105

Error Message
Out of Memory
Out of Memory
Secure Print Data
is full.
Print Unable XX
(XX = Error Code)
Protected Device
Rename the File
Cause
The machine's memory is full.
The machine's memory is full.
The machine has a mechanical
problem.
The protect switch of the USB
Flash memory drive is on.
There is already a file on the
USB Flash memory drive with
the same name as the file you
are trying to save.
Action
Fax sending or copy operation in process
Do one of the following:
 Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other

operations in progress finish, and then try
again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid storing
more faxes in the memory.
(uu Advanced User's Guide: Printing a fax
from the memory and Fax Storage)
 Add optional memory.
(uu Advanced User's Guide: Memory
board)
Print operation in process
Do one of the following:
 Reduce the print resolution.
(uu Software User's Guide: Printing (for
®
Windows ) or Printing and Faxing (for
Macintosh))
 Clear the faxes from the memory.
(See the above explanation.)
Press Stop/Exit and delete the previously
stored secure print data.
uu Software User's Guide: Secure Print Key
Do one of the following:
 Turn the power switch off, wait a few
minutes, and then turn it on again.
(See Transferring your faxes or Fax Journal
report uu page 100.)
 If the problem continues, call Brother
customer service for support.
Turn off the protect switch of the USB Flash
memory drive.
Change the file name of the file on the USB
Flash memory drive or the file you are trying to
save.
Troubleshooting
B
97