Brother MFC-8510DN User Manual page 106

Error Message
Replace Parts
Drum
Replace Parts
Fuser Unit
Replace Parts
Laser Unit
Replace Parts
PF Kit 1
PF Kit 2
PF Kit MP
Replace Toner
Scan Unable XX
(XX = Error Code)
Size Error
Size Error DX
98
Cause
It is time to replace the drum
unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser
unit.
It is time to replace the laser
unit.
It is time to replace the paper
feeding kit.
The toner cartridge is at the
end of its life. The machine will
stop all print operations.
While memory is available,
faxes will be stored in the
memory.
The machine has a mechanical
problem.
Document is too long for
duplex scanning.
You can not use the paper size
defined in the printer driver in
this tray.
The paper size defined in the
printer driver and the control
panel menu is not available for
automatic duplex printing.
The paper in the tray is not the
correct size and is not usable
for automatic duplex printing.
Action
Replace the drum unit.
(See Replacing the drum unit uu page 76.)
Reset the drum unit counter.
(See Replacing the drum unit uu page 76.)
Call Brother customer service or a Brother
Authorized Service Center to replace the fuser
unit.
Call Brother customer service or a Brother
Authorized Service Center to replace the laser
unit.
Call Brother customer service or a Brother
Authorized Service Center to replace the
PF Kit.
Replace the toner cartridge.
(See Replacing the toner cartridge
uu page 69.)
 Turn the power switch off, and then turn it
on again.
(See Transferring your faxes or Fax Journal
report uu page 100.)
 If the problem continues, call Brother
customer service for support.
Press Stop/Exit. Use the suitable size of paper
for duplex scanning.
(See Print media uu page 173.)
Choose a paper size which is supported by the
tray shown on the LCD.
(See Paper Size uu page 16.)
Press Stop/Exit. Choose a paper size which is
supported by the duplex tray.
The paper size you can use for automatic
duplex printing is A4.
Load the correct size of paper in the tray and
set the "Paper Size" (Menu, 1, 2, 2).
The paper size you can use for automatic
duplex printing is A4.