Brother MFC-8510DN User Manual page 125

Printing received faxes (continued)
Difficulties
Received faxes appear as split or
blank pages.
Telephone line or connections
Difficulties
Dialling does not work. (No dial
tone)
The machine does not answer
when called.
Suggestions
Left and right margins are cut off or a single page is printed on two pages.
See Paper Size uu page 16.
Turn on Auto Reduction.
uu Advanced User's Guide: Printing a reduced incoming fax
Suggestions
Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall socket and the LINE socket of the machine.
(Not available in New Zealand) Change Tone/Pulse setting.
uu Quick Setup Guide
If an external phone is connected to the machine, send a manual fax by pressing
Hook or by lifting the handset of the external telephone and dialling the number
using the external telephone. Wait to hear the fax receiving tones before pressing
Start.
If there is no dial tone, connect a known working telephone and telephone line
cord to the socket. Then lift the external telephone's handset and listen for a dial
tone. If there is still no dial tone, ask your telephone company to check the line
and/or wall socket.
Make sure the machine is in the correct receive mode for your setup.
See Receive Mode settings uu page 31.
Check for a dial tone. If possible, call your machine to hear it answer. If there is
still no answer, check the telephone line cord connection. If you do not hear ringing
when you call your machine, ask your telephone company to check the line.
Troubleshooting
B
117