Hitachi TM3000 Instruction Manual page 256

Code Error Message
1423 Memory size is inadequate.
Change the destination of an
image to save.
1425 File Name is not valid.
Use a different File Name.
1430 The image cannot be saved
directly from a shared network
folder.
Assigning a drive letter to the
connection is required to save
the image using My Computer.
1450 Failed to save the image.
1470 Added items exceed the
maximum number of the items
that can be added on an image.
No more items can be added.
1471 Proceeding with this operation
will delete all the items.
Do you want to delete?
Countermeasure
During image data saving, it was detected that a
free space in the hard disk or data saving
medium is not adequate. Image could not be
saved normally. Click the [OK] button to dismiss
the message. Secure an adequate free space in
the hard disk or data saving medium. Saving
image data requires approximately 350 kB for
quick save, and approximately 1.3 MB for
standard save (in the case of BMP format
images).
The following characters such as ¥, /, :, ;, *, ?, ",
<, >, |, !, ', or & cannot be used for file names.
Clicking the [OK] button displays the data saving
window again. Save the image by renaming the
file.
This message appears if you attempt to save an
image directly from My Network. Clicking the
[OK] button displays the data saving window
again.
No image can be saved directly from My
Network. For image saving, assign a network
drive on My Computer and specify the network
drive on the data saving window.
Image saving failed because any error occurred
during image saving. Click the [OK] button to
dismiss the message. Make sure the saving
destination allows your access and it is not
write-protected (not a read-only memory). If the
same error reoccurs, contact the nearest service
representative.
This message appears when the number of data
items exceeds 50. Click the [OK] button to
dismiss the message.
To add new items, delete unnecessary items
first.
This message appears to confirm the operation.
Clicking the [OK] button deletes all items, and
clicking the [Cancel] button cancels the
operation.
5 - 39