1.
Once the unit has powered up, the following menu is displayed. Press the
to continue.
2.
The Digital TV recorder will now scan and store all available channels. Depending on
the quality of your reception, this may take several minutes. Please be patient and do
not press any buttons.
If no channels are found, a message is displayed asking you to check your aerial. Confirm that your
aerial is connected correctly and press the [oK] button to restart automatically tuning.
3.
Once the automatic tuning is complete, a summary screen is displayed.
[oK] button to exit the automatic tuning process.
4.
Press the
Congratulations ! The Digital TV recorder is now ready to use.
HDR5010 User Guide.indb 15
Automatically Tuning
[oK] button
15
8/6/10 09:08:17