Toshiba HDR5010KB Owner's Manual page 37

3. Dolby Surround.
Select this option if connecting to a TV/Amplifier that supports Dolby Surround Pro
Logic, Dolby Pro Logic II, Dolby Pro Logic IIx or Dolby Pro Logic IIz decode.
- All outputs will carry Stereo (with Dolby Surround).
Stereo.
4.
Select this mode if connecting to a Stereo audio device.
- All outputs will carry Stereo (without Dolby Surround).
Audio Delay
Allows you to delay the audio timing so that it synchronises with the TV picture. This
allows for delays that may be introduced by some TVs.
Dynamic Range Control
The following options are available:
off mode <default>.
1.
The sound output is as is intended by the programme being watched.
TV mode.
2.
Default values of Cut and Boost are selected to both reduce high volume and
increase low volume sound, relative to the main sound volume through your TV.
3. on mode.
Allows Cut and Boost values to be changed.
Cut: Allows you to reduce high volume sounds such as explosions, relative to the
main sound volume. The maximum reduction is 100.
Boost: Allows you to increase low volume sounds such as speech or background
sounds, relative to the main sound volume. The maximum increase is 100.
note:
• These settings are only effective if supported by the broadcaster.
•
network Settings
The following options are available:
1. Auto <default>.
This is the default option. All settings (IP address, DNS server, MAC address etc)
are automatically selected (DHCP). The settings cannot be changed.
HDR5010 User Guide.indb 37
Main Menu options
37
8/6/10 09:08:29