Sony Handycam DCR-TRV730E Operating Instructions Manual page 116

Changing the menu settings
Icon/item
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
EDIT SET
INDICATOR
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a
TV or VCR will not appear on the screen even when your camcorder is connected to outputs on
the TV or VCR. (Except when your camcorder is connected with the i.LINK cable)
In more than 5 minutes after removing the power source
The AUDIO MIX, FLASH LVL, COMMANDER and HiFi SOUND items are returned to their
default settings.
The other menu items are held in memory even when the battery is removed.
Notes on INDICATOR
•When you select BL ON, battery life is reduced by about 3 percent during recording.
•When you use power sources other than the battery pack, BL ON is automatically selected.
116
Mode Meaning
z ON To activate the Remote Commander supplied
with your camcorder
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
z LCD To show the display on the LCD screen and in
the viewfinder
V-OUT/LCD To show the display on the TV screen, LCD
screen and in the viewfinder
z ON To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording
— To make programme and perform video
editing (p. 86)
— To adjust and set the synchronicity of your
camcorder and a VCR for dubbing in edit set
mode (p. 86)
z BL OFF To turn off the backlight on display window
BL ON To turn on the backlight
POWER
switch
CAMERA
VCR
MEMORY
CAMERA
VCR
MEMORY
CAMERA
MEMORY
VCR
VCR
CAMERA
VCR
MEMORY