Using "Memory Stick"
–introduction
Inserting "Memory Stick"
Insert a "Memory Stick" in the "Memory Stick"
slot as far as it can go with the v mark facing
toward the "Memory Stick" slot as illustrated
below.
To eject the "Memory Stick"
Press the "Memory Stick" eject button. The
"Memory Stick" pops up.
When the access lamp is lit or flashing
Do not shake or strike your camcorder because
your camcorder is reading the data from the
"Memory Stick" or recording the data on the
"Memory Stick". Do not turn the power off , eject
the "Memory Stick" or remove the battery pack.
Otherwise, the image data breakdown may
occur.
If "
MEMORY STICK ERROR" is displayed
The "Memory Stick" may be corrupted. If this
occurs, use another "Memory Stick."
"Memory Stick" eject button/
"Memory Stick" slot/
Access lamp/
v
129