Hitachi WJ200 Series Quick Reference Manual page 52

CALL NOW 800-985-6929
Standard Functions
NOTE:. Mark " " in b031=10 shows the accessible parameters when b031 is set "10", high
level access.
Func.
Code
Frequency source
A001
Frequency source,
A201
2
Run command source
A002
Run command source,
A202
2
Base frequency
A003
Base frequency,
A203
2
Maximum frequency
A004
Maximum frequency,
A204
2
[AT] selection
A005
[O] input active range start
A011
frequency
[O] input active range end
A012
frequency
[O] input active range start
A013
voltage
[O] input active range end
A014
voltage
CALL NOW 800-985-6929
http://www.automatedpt.com
"A" Function
Name
nd
motor
nd
motor
nd
motor
nd
motor
http://www.automatedpt.com
Description
Eight options; select codes:
00 ...POT on ext. operator
01 ...Control terminal
02 ...Function F001 setting
03 ...ModBus network input
04 ...Option
06 ...Pulse train input
07 ...via EzSQ
10 ...Calculate function output
Five options; select codes:
01 ...Control terminal
02 ...Run key on keypad,
or digital
operator
03 ...ModBus network input
04 ...Option
Settable from 30 Hz to the
maximum frequency(A004)
nd
Settable from 30 Hz to the 2
maximum frequency(A204)
Settable from the base
frequency to 400 Hz
nd
Settable from the 2 base
frequency to 400 Hz
Three options; select codes:
00...Select between [O] and [OI]
at [AT] (ON=OI, OFF=O)
02...Select between [O] and
external POT at [AT]
(ON=POT, OFF=O)
03...Select between [OI] and
external POT at [AT]
(ON=POT, OFF=OI)
The output frequency
corresponding to the analog
input range starting point,
range is 0.00 to 400.0
The output frequency
corresponding to the analog
input range ending point,
range is 0.0 to 400.0
The starting point (offset) for the
active analog input range,
range is 0. to 100.
The ending point (offset) for the
active analog input range,
range is 0. to 100.
50
Email: charles@automatedpt.com
Run Defaults
Mode
Lnitial data Units
Edit
02 −
02 −
−
02
02 −
60.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
00 −
0.00 Hz
0.00 Hz
0. %
100. %
Email: charles@automatedpt.com