Hitachi WJ200 Series Quick Reference Manual page 67

CALL NOW 800-985-6929
Func.
Code
Decel. overvolt. suppress
B133
proportional gain
Decel. overvolt. suppress
B134
integral time
GS input mode
b145
Display ex.operator connected
b150
1st parameter of Dual Monitor
b160
2nd parameter of Dual Monitor
b161
Frequency set in monitoring
b163
Automatic return to the initial
b164
display
Ex. operator com. loss action
b165
Data Read/Write select
b166
Inverter mode selection
b171
Initialization trigger
b180
(*)
Password Settings A
b190
Password authentication A
b191
Password Settings B
b192
Password authentication B
b193
CALL NOW 800-985-6929
http://www.automatedpt.com
"b" Function
Name
Proportional gain when b130=01.
Range is: 0.00 to 5.00
Integration time when b130=01.
Range is: 0.00 to 150.0
Two option codes:
00...No trip (Hardware shutoff only)
01...Trip
When an external operator is
connected via RS-422 port, the
built-in display is locked and shows
only one "d" parameter configured
in:
d001 ~ d030
Set any two "d" parameters in b160
and b161, then they can be
monitored in d050. The two
parameters are switched by
up/down keys.
Set range: d001 ~ d030
Two option codes:
00...Freq. set disabled
01...Freq. set enabled
10 min. after the last key operation,
display returns to the initial
parameter set by b038. Two option
codes:
00...Disable
01...Enable
Five option codes:
00...Trip
01...Trip after deceleration to a stop
02...Ignore
03...Coasting (FRS)
04...Decelerates to a stop
00... Read/Write OK
01... Protected
Three option codes:
00...No function
01...Std. IM (Induction Motor)
03...PM(Permanent Magnet Motor)
This is to perform initialization by
parameter input with b084, b085 and
b094. Two option codes:
00...Initialization disable
01...Perform initialization
0000(Invalid Password)
0001-FFFF(Password)
0000-FFFF
0000(Invalid Password)
0001-FFFF(Password)
0000-FFFF
http://www.automatedpt.com
Description
65
Email: charles@automatedpt.com
Run Defaults
Mode
Lnitial data Units
Edit
−
0.20
1.0 sec
00 -
001 −
−
001
002 −
00 -
00 -
02 -
00 -
00 -
00 -
0000 -
0000 -
0000 -
0000 -
Email: charles@automatedpt.com