Panasonic System 850 Operating Instructions Manual page 101

Receiver Control
Camera Housing Control
The following function is available only when the WV-
RC100 or WV-RC150 Receivers are included in the sys-
tem and the specified camera housing is installed.
• Wiper Control
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera
Selection.
2. Pressing the [3] button while holding down the
[SHIFT] button will turn on the Housing Wiper of
the camera until buttons are released.
• Defroster Control
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera
Selection.
2. Pressing the [8] button while holding down the
[SHIFT] button will turn on the housing defroster of
the camera.
To turn off the defroster, pressing the [7] button
while holding down the [SHIFT] button.
106
T&D CAM ID GEN
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS
ALL
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
CLEAR
( ESC )
SHIFT BLK EXIT
T&D CAM ID GEN
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS
ALL
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
CLEAR
( ESC )
SHIFT BLK EXIT
Auxiliary Control
The following function is available only when the WV-
RC100 or WV-RC150 Receivers are included in the sys-
tem.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [2] button while holding down the [SHIFT]
button will turn on the user's auxiliary switch 1 of the
Receiver.
Pressing the [1] button holding down the [SHIFT] but-
ton will turn off the user's auxiliary switch 1 of the
Receiver.
3. Press the [5] button while holding down the [SHIFT]
button will turn on the user's auxiliary switch 2 of the
Receiver.
Pressing the [4] button while holding down the [SHIFT]
button will turn off the user's auxiliary switch 2 of the
Receiver.
T&D CAM ID
AUX1 OFF AUX1 ON
ALM S VLD S
MON STATUS
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
SHIFT BLK
GEN
WIPER
SYS S
ALL
CLEAR
( ESC )
EXIT