Priority Lock
This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution: This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of that monitor.
Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] button while holding down
the [SHIFT] button will toggle the Priority Lock mode on
and off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with "L" sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
GROUP PRESET
PREV
OPE ID
S-CTL ID
LOG OUT
PAUSE
CAM MENU OFF
GROUP
F1
SEQ
F2
OSD
CAM FUNC
Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] button while holding down
the [SHIFT] button will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
103
NEXT
T&D
CAM ID
GEN
AUX1 OFF
AUX1 ON
WIPER
ALM S
VLD S
SYS S
STOP
MON STATUS
ALL
CAM MENU ON
AUX2 OFF
AUX2 ON
TOUR
ALM H
VDL H
SEQ
DEF OFF
DEF ON
CLEAR
( ESC )
MONITOR
LOCK
SHIFT
BLK
EXIT
OSD SERVICE