Table of Contents
Advertisement
Video Loss History Table
There are 100 video loss detection records stored in
chronological order in 10 pages of table.
1. Select a monitor for displaying the history.
Refer to the Monitor Selection.
2. Pressing the [5] button while holding down the [MONI-
TOR] button will display the VIDEO LOSS HISTORY
table as shown in the figure on the active monitor.
VIDEO LOSS HISTORY
LCAM
STATE
2
OK
2
LS
2
OK
1
OK
3
OK
5
VL
1
VL
3
VL
5
VL
1
OK
GROUP PRESET
PREV
OPE ID
S-CTL ID
LOG OUT
PAUSE
CAM MENU OFF
GROUP
F1
SEQ
F2
OSD
CAM FUNC
The columns in the table indicate the states as shown
below.
LCAM: Logical camera number that is connected to
the system.
STATE: Indicates video loss changes.
OK: Video loss is recovered.
LS: Video level is below normal and in sync.
VL: Video level is below normal and out of sync.
HL: Video level is above normal and out of sync.
TYPE: Place where the video loss occurs.
S: MXSW input
C: MXCONT input
DATE-TIME: Date and time when the video loss state
changes.
3. Press the [NEXT] button to select the next page of the
history, and press the [PREV] button to back up to the
previous page.
4. Press the [NEXT] button while holding down the
[SHIFT] button to select the first page of the history,
and press the [PREV] button while holding down the
[SHIFT] button to select the last page.
116
PG 1
TYPE
DATE-TIME
S
03/21/00
10:17
S
03/21/00
10:16
S
03/21/00
10:15
C
03/21/00
10:14
C
03/21/00
10:14
C
03/21/00
10:12
C
03/21/00
10:12
C
03/21/00
10:11
S
03/21/00
10:10
C
03/21/00
9:50
NEXT
T&D
CAM ID
GEN
AUX1 OFF
AUX1 ON
WIPER
ALM S
VLD S
SYS S
STOP
MON STATUS
ALL
CAM MENU ON
AUX2 OFF
AUX2 ON
TOUR
ALM H
VDL H
SEQ
DEF OFF
DEF ON
CLEAR
( ESC )
MONITOR
SHIFT
BLK
EXIT
LOCK
OSD SERVICE
5. Pressing the [0] button while holding down the [MONI-
TOR] button will toggle the background camera
images and black on the active monitor.
6. To exit as it stands, select a new monitor.
7. To exit from the mode, press the [CLEAR (ESC)] but-
ton while holding down the [MONITOR] button or select
a camera to be displayed on the active monitor.
Advertisement
Table of Contents
