Point Of Installation - AEG Protect C.R Operating Instructions Manual

4.2

Point of Installation

PROTECT C.R is designed to be installed in a protected
environment. When installing the unit, pay attention to such
factors as sufficient ventilation and suitable ambient
conditions.
Install the units in a room that is dry, relatively dust-free and
free of chemical vapours.
Make sure that no magnetic storage media are stored and/or
operated close to PROTECT C.R
Please keep the plastic packaging bags away
from babies and children in order to safeguard
against suffocation accidents.
Handle the components with care. Please take
into account the weight. It may be necessary to
engage the help of a second person, particularly
in the case of the 2 and 3 kVA models and if
there are external battery units.
PROTECT C.R is air-cooled. Do not obstruct the
air vents!
The UPS and in particular its external battery
modules should preferably be operated at room
temperature (between 15°C and 25°C).
Check the nameplate to make sure the voltage
and frequency data correspond to the values
applicable to your loads.
23