Operating Statuses; Normal Operation - AEG Protect C.R Operating Instructions Manual

5.3

Operating Statuses

5.3.1

Normal Operation

Mains
Diagram
Once you have connected the UPS to a suitable mains
connection, you can start operation using the UPS main
switch (see also "Electrical Start-Up" on page 29). Normally,
the UPS operates continuously. The UPS now supplies the
output with voltage, this being signalled by the symbols mains
(LED AC INPUT) and rectifier (LED UPS ON) symbols which
light up permanently.
This is often referred to as "online" mode. It offers the
greatest protection, in particular when there are mains
fluctuations and mains failures, because the loads are
supplied continuously with voltage with no interruptions in this
operating mode.
The LED bargraph (LED chain on the left hand side of the ON
/ OFF button) show during operation the actual utilization of
the UPS (s. page 38).
Autom.
bypass
REC INV
~
~
~
Battery
charger
Battery
Power circuit with
mains supply
Safe busbar:
Load
32