Signalling And Error Correction; Signalling - AEG Protect C.R Operating Instructions Manual

6

Signalling and Error Correction

6.1

Signalling

1.
2.
3.
4.
ON push button (ON): Press the ON switch for
about 2 seconds to switch on the UPS.
UPS Test: To execute an UPS self test press this
button for about 2 seconds in the normal operation
mode.
OFF push button (OFF): Press the OFF switch
for about 2 seconds to switch off the UPS
Deactivate
acoustic alarm: By pressing this switch for about
2 seconds during the alarm an acoustic alarm can
be deactivated.
LED UPS ON (inverter): The green LED lights up
if the UPS system is supplying voltage provided
by the mains power via the inverter.
LED BATTERY (battery): The orange LED lights
up when power is supplied by the batteries.
38