Sharp AX-600X(R) Operation Manual page 14

AUTOMATIC COOKING
Microwave
A U T O D E F R O S T
Auto Defrost automatically defrosts all the foods shown
in the Auto Defrost Chart on page E-4 2 .
* Suppose you want to defrost a 0.5 kg steak with
Standard time.
PROCEDURE
Press Microwave, turn
1
the Knob to select
AUTO DEFROST and
press Enter.
2
Turn the Knob to select
the desired food
STEAKS, CHOPS and
press Enter.
3
Turn the Knob to select
the desired amount (0.5
kg) and press Enter.
4
Make sure STANDARD is
selected and press Enter.
5
Press START.
The oven will stop and
6
directions will be displayed.
Follow the indicated
message. Close the door.
Press START.
7
After cooking, EXTEND will
appear. If you wish to
extend defrosting time, turn
the Knob to add time and
press START. If not, press
Stop/Clear.
NOTES:
1. Enter the weight of the food only. Do not include the
weight of the container.
2. Any Auto Defrost selection can be programmed with
More or Less Time Adjustment. See page E-21.
3. To defrost other foods or foods above or below the
weights allowed on Auto Defrost Menu Guide, use
time and 30% microwave power. See Microwave on
page E-20.
4. The programmed defrosting times are average times.
To extend defrosting times preprogrammed in the
automatic operation, see EXTENDING COOKING
TIME AT THE END OF COOKING on page E-21.
5. Do not use the baking tray, steam tray and metal
rack.
S E N S O R R E H E A T
Sensor Reheat automatically reheats all the food shown
in the Sensor Reheat Chart on page E- 42.
SPECIAL NOTE for SENSOR REHEAT:
1. Wipe off any moisture from the outside of cooking
containers and the interior of the oven with a dry
cloth or paper towel prior to reheating.
2. After oven is plugged in, wait 2 minutes before using.
3. SENSOR ERROR will be displayed if:
(a) the sensor does not detect the vapour.
(b) the door is opened or theStop/Clear pad is
pressed before the cooking time is displayed.
To clear, press theStop/Clear pad and reheat manually.
* Suppose you want to reheat 4 cups of soup with
Standard time.
Press Microwave , turn
1
the Knob to select
SENSOR REHEAT and
press Enter .
2
Turn the Knob to select
the desired food SOUP
and press Enter .
3
Make sure STANDARD is
selected and press Enter.
4
Press START .
* When the sensor detects the vapour from
the food, the remaining reheating time will
appear.
5
After cooking, follow the indicated message.
NOTES:
1. It is not necessary to enter the weight of the food.
2. Any Sensor Reheat selection can be programmed
with More or Less Time Adjustment. See page E- 21.
3. To reheat other food or food above or below the
weights allowed on Sensor Reheat Chart, reheat
manually. See Microwave on page
4. When reheating small quantities of food on Sensor
Reheat, the food may be reheated without displaying
any remaining reheating time during the reheating.
5. Do not use the baking tray, steam tray and metal
rack.
E – 13
PROCEDURE
E- 20.