Fujitsu ETERNUS DX200F Operation Manual page 32

Chapter 4 Maintaining Optional Products
4.1 Installing Additional Drives
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Tag
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock
lever is still left open.
Dummy drive unit
Tab
Lock lever
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
32
P3AM-8472-01ENZ0