Fujitsu ETERNUS DX200F Operation Manual page 37

Chapter 4 Maintaining Optional Products
4.2 Adding Servers
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click "LUN
Group" in [Category].
The [LUN Group] screen appears.
2
In [Action], click [Add LUN Group].
The [Add LUN Group] screen appears.
3
Enter the LUN group name in [LUN Group Setting], and then click the [Add] button in [Define LUN
Group].
The [Add LUN] screen appears.
4
Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN Setting],
select the number for the first volume to be allocated, and click the [OK] button.
The LUNs that are to be registered in the LUN group and the information for the volumes that are allo-
cated to the LUNs are displayed.
5
Click the [Create] button.
A confirmation screen appears.
6
Click the [OK] button.
The LUN group is added and the setting completion screen appears.
7
Click the [Done] button.
The screen display returns to the [LUN Group] screen.
■
Host Affinity Creation
Create an association between a host group and a CA port group and an association between a host group
and a LUN group to enable the host to recognize a LUN group.
The procedure to create a host affinity is as follows:
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click [Create
Host Affinity] in [Action].
The [Create Host Affinity] screen appears.
2
Select "Host Group - CA Port Group" in "Target Connection".
3
Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated.
(1)
Click the [Browse] button in "Host Group".
A screen to select the host group appears.
37
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0