Fujitsu ETERNUS DX200F Operation Manual page 38

Chapter 4 Maintaining Optional Products
4.2 Adding Servers
(2)
Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
• When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
When "All" is selected
•
Select a host response, and then click the [OK] button.
(3)
Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4)
Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in [CA Port Group].
(5)
Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6)
Select the LUN group that is to be associated, and then click the [OK] button.
The name of the selected LUN group is displayed in [LUN Group].
4
Check the path between the host and the host interface port on the ETERNUS DX in [Host - CA Port Con-
nection], and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The host affinity is created and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Connectivity] screen.
38
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0