6. Order of Installation
1) Preparation Work Before Installation of Refrigerator
2. Insert the hinge stand
(Don't insert the hinge stand when thickness of the cabinet material is 20mm.)
3. Lean the refrigerator backward and then fix the depth adjust bracket
(2places) loosely with the hinge bolting screw
cold store room and the freezing room) (See Fig.3).
(Fig. 3)
2) Case-related Work After Inserting Refrigerator
4. Draw the power cable through the back of the cabinet.
Be careful that the power cord is not trapped beneath
the refrigerator as you install it into the cabinet. The cord
may be crushed and damaged resulting in a fire hazard.
5. Insert the refrigerator into the cabinet so that the
end of the hinge stand
part of the cabinet.
Caution must be taken not to jam your hands between
refrigerator and cabinet when inserting refrigerator into
cabinet.
into the hinge (4places) as in the below figure (See figure 3)
3
3
e
e
3
e
3
e
corresponds to the front
to the underside
in figure (Same for door work of the
2
2
2
2
Top Surface of Refrigerator
(Plan Drawing)
10