Change Of Door Open Direction Of Refrigerator - LG 3828JD8636T Owner's Manual

19
6. Order of Installation

7) Change of Door Open Direction of Refrigerator

Perform work for changing the door before installation.
1. Loosely release the screws
of the hinge on the case part
of the freezer and then
separate the door by pushing it
to the right (See Figure 23).
2. Release the screws No.
completely and then fix them
loosely to the reverse side (See
Figure 24)
3. Separate the hinge by releasing
the No. ,
4. Move the separated hinges
(Figure 24) diagonally and fix it
to the door by turning the
hinge by 180˚.
5. Push the hinge from the left
side to the right side to ensure
that the door hinge and the
screws are fixed to the case
(See page 2) match.
6. Adjust the top/down or the
left/right interval of the
refrigerator door so that
leaning should not occur to
either side, and then tighten
screws.
7. If the hinge bolting is
completed, insert the
screws at the opposite side of
the hinge (6 places).
Same as above order for change of the door open direction of the fridge door.
,
,
bolt to the door.
cap
(Fig. 24)
(Fig. 23)