Table of Contents
Advertisement
PERCEPTION e
ex
&
button.
To Return a Station-to-Station
Message Call:
1. Lift the handset.
2. Press the
SSM
button.
To Clear a Station-to-Station
Message from the Calling
Station:
1. Lift the handset.
2. Dial the called station number
where SSM is set.
3. Press the
SSM
button twice.
To Call Forward All Calls to
Voice Mail:
1. Press the
CFD
button or dial
the access code
(*
9) _____.
The SSM LED will go out, the "CALL" LCD display at the called station
will clear, and the "SENT" LCD display at the calling station will clear.
You will hear dial tone.
The calling station will ring. When the station answers, the SSM LED will
go out unless there are additional SSMs set to your station. The "CALL"
LCD display at the called station will clear, and the "SENT" LCD display
at the calling station will clear.
You will hear dial tone.
The SSM LED will go out at the called station, the "CALL" LCD display at
the called station will clear, and the "SENT" LCD display at the calling
station will clear.
NOTE: Up to six SSM displays may be stored on the LCD (only three 3-
digit numbers can be displayed at one time). The station number in the
left-most position will be called when the
rotate the station numbers, press the
SCRL
button located next to the LCD.
VOICE MAIL
The following instructions provide general operating information for voice
mail systems. Refer to your voice mail system's user guide for additional
operating information.
The CFD LED will flash.
DIGITAL TELEPHONE
SSM
button is pressed. To
PAGE
button once, then press the
25
Advertisement
Table of Contents
