Speed Dialing; Automatic Dialing - Toshiba Perception e&ex User Manual

DIGITAL TELEPHONE
To Adjust Station-to-Station
Handsfree Volume:
While receiving a handsfree
station-to-station call, press the
VOLUME button until the desired
volume is set.
To Dial a Stored Telephone
Number:
1. Lift the handset.
2. Press the appropriate ADL
button.
To Store a Telephone Number
(for Telephones with Flexible

Automatic Dialing):

1. Leave the handset on-hook.
2. Press the desired ADL
3. Dial the telephone number to
be stored (16 digits
maximum).
4. Press the ADL button again.
4

SPEED DIALING

AUTOMATIC DIALING
An Automatic Dialing (ADL) button allows you to store and automatically
dial any telephone number (up to 16 digits) by pressing a single button.
The stored number can be a station number, access code, or outside
number. If your telephone has Flexible Automatic Dialing, then you can
store numbers directly from your telephone. If, however, your telephone
has Fixed Automatic Dialing, stored numbers are fixed and can only be
altered via programming.
You will hear dial tone.
The telephone number will be dialed.
button. The ADL LED will flash.
NOTE: It may be necessary to insert a pause to allow for dial tone delay.
To enter a pause, press the
The ADL LED will go out, and the telephone number will be stored.
* button after the trunk access code.
PERCEPTION e
ex
&