Manual Signaling; Privacy Release - Toshiba Perception e&ex User Manual

DIGITAL TELEPHONE
To Cancel Maid-in-Room Status:
1. Lift the handset.
2. Dial the access code (# 0
_____.
3. Dial the access code (# 0
_____.
To Cancel Maid-in-Room Status
and Set Clean Room Status:
1. Lift the handset.
2. Dial the access code (# 0
_____.
3. Dial the access code (# 0
_____.
To Signal the Station:
1. Press the SIG button.
To Release Privacy:
1. Press the PRS button.
2. The second station user
should now press the
appropriate DN button.
32
You will hear dial tone.
0)
You will hear recall dial tone.
2)
You will hear recall dial tone, and Maid-in-Room Status will now be
canceled.
You will hear dial tone.
0)
You will hear recall dial tone.
3)
You will hear recall dial tone, Maid-in-Room Status will now be canceled,
and Clean Room Status will be set.

MANUAL SIGNALING

This feature allows you to signal a specific station.
The SIG LED will flash once, and a single tone will be heard via the
speaker of the called telephone.

PRIVACY RELEASE

By operating the Privacy Release (PRS) button, you can allow another
station user who shares your DN appearance to join an established
conversation. A maximum of five parties (station or trunk), including your
own station, can be included in the conversation.
The LED of the DN which has Privacy established will flash.
The DN LED will change to the In-use status rate at both stations, and
the conference will now begin.
PERCEPTION e
ex
&