Sony HDMI VPL-BW5 Operating Instructions Manual page 23

Tips
• You can select the desired language for the
menu screen. For details, refer to "Step 4:
Selecting the Menu Language".
(@'
page 24)
• When "Auto Input Search" is set to "On" in
the SET SETIING menu, the input terminal
with effective signals is automatically
displayed by pressing INPUT.
(@'
page 39)
5
Adjust the upper or lower
position of the picture.
Use the adjuster to adjust the picture
position.
Using the adjuster
Lift the projector while pressing the
adjuster adjustment button, and adjust
the tilt of the projector, then release the
button to lock the adjuster.
Adjuster adjustment button
1m
• Be careful not to let the projector down
on your fingers.
• Do not push hard on the top of the
projector or do not drag it hard with the
adjuster out. It may cause malfunction.
6
Adjust the trapezoidal distortion
of the picture.
The V Keystone adjustment is
performed automatically when you
adjust the tilt of the projector with the
adjuster. If you do not want to perform
the keystone adjustment automatically,
set "V Keystone" in the INSTALL
SETIING menu to "Manual."
(CW'
page
42)
mmI
If you set "V Keystone" to "Auto," the V
Keystone correction is automatically
adjusted. However, it may not be perfectly
adjusted depending on the room
temperature or the tilt of the screen. In this
case, adjust it manually.
7
Adjust the picture size using the
zoom lever.
a
Adjust the focus using the focus
ring.
23
(')
o
::::J
::::J
(t)
$1.
o'
::::J
en
l»
::::J
a.
""0 ....
(t)
"'0
l»
a
o'
::::J
en