Specifications - Sony HDMI VPL-BW5 Operating Instructions Manual

Specifications
Optical characteristics
Projection system
3 LCD panels, I lens, projection
system
LCD panel 0.59-inchvWXGA panel, about
3,070,000 pixels (1280 x 800 x
3)
Lens 1.2 times zoom lens
f 18.53 to 22.18 mmIFI.65 to 1.93
Lamp 190 W Ultra high pressure lamp
Projected picture size
40 to 300 inches (measured
diagonally)
Light output
l )
2000 1m
I)
When the Lamp Mode is set to "High."
Throwing distance
2)
40-inch: 1.2 to 1.5 m
(3.9 to 4.9 feet)
80-inch: 2.5 to 2.9 m
(8.2 to 9.5 feet)
100-inch: 3.1 to 3.7 m
(10.2 to 12.1 feet)
I 50-inch: 4.6 to 5.6 m
(15.1 to 18.4 feet)
2oo-inch: 6.2 to 7.4 m
(20.3 to 24.3 feet)
250-inch: 7.7 to 9.3 m
(25.3 to 30.5 feet)
300-inch: 9.3 to 11.1 m
(30.5 to 36.4 feet)
2)
When placed on the floor, the adjuster not
stretched, the V Keystone function has been
done, and "Wide Mode" in the INPUT
SETTING menu is set to "Full 2."
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC3.5S/PALISECAMJ
NTSC4.43/PAL-MJPAL-N/
PAL60 system, switched
automatically/manually
(NTSC4.43 is the color system
used when playing back a video
recorded in NTSC on a
NTSC4.43 system VCR.)
Resolution 750 horizontal TV lines (video
input)
1280 x 800 dots (RGB input)
Acceptable computer signals 3 )
fH: 19 to 92 kHz
fV: 48 to 92 Hz
52
(Maximum input signal resolution:
SXGA+ 1400 x 1050
fV: 60 Hz)
3) Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB/component 50/60 Hz,
Progressive component 50/60
Hz, DTV (480/60i, 575/50i,
480/60p, 575/50p, nO/60p,
nO/50p, 1080/60i, 1080/50i),
Composite video, Y/C video
Input/Output
VIDEO IN VIDEO: phono type
Composite video:
1
Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-
pintype
Y (luminance): I Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p ±2 dB (NTSC) (75 ohms
terminated), burst 0.3 Vp-p ±2
dB (PAL) (75 ohms terminated)
INPUT A RGB: HD D-sub15-pin (female)
Analog RGB/component:
RIR-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with synclY: I Vp-p ±2 dB
sync negative (75 ohms
terminated)
BIB-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD: Horizontal sync input: TTL
level, positive/negative
VD: Vertical sync input: TTL
level, positive/negative
HDMI Digital RGBIY CB (PB) CR (PR)
SERVICE RS-232C: D-sub 9 pin
General
Dimensions
314x 109x 269mm(12 3 /sx
4 3/ s x 10 5/ S inches) (wlh/d)
(without projecting parts)
Mass Approx. 3.0 kg (6 Ib 10 oz)
Power requirements
AC 100 to 240 V, 2.6 to l.l A, 50/
60Hz
Power consumption
Max.260 W (in standby: 3 W)
Heat dissipation