Installation Procedure - Mitsubishi Electric FR-A8NC Instruction Manual

2.2

Installation procedure

 Installation of the communication option LED display cover
(1) Remove the inverter front cover. (Refer to Chapter 2 of the Instruction Manual (Detailed) of the inverter for details on how
to remove the front cover.)
Mount the cover for displaying the operation status indication LED for the communication option on the inverter front cover.
(2) Cut off hooks on the rear of the inverter front cover with nipper, etc. and
open a window for fitting the LED display cover.
(3) Fit the communication option LED display cover to the front of the inverter
front cover and push it into until fixed with hooks.
NOTE
• The protective structure (JEM1030) changes to the open type (IP00).
Caution
 Take care not to hurt your hand and such with portions left by cutting hooks of the rear of the front cover.
Cut off with a nipper, etc.
Cut off with a nipper, etc.
∗ Fit it so that the position of
lenses is in the upper-right
of the LED display cover.
∗
INSTALLATION
2
11