Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the MotorKit-91F267-MC Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in...
MotorKit-91F267-MC User Guide 1 Overview 1.1 Abstract The MotorKit-91F267-MC is a multifunctional evaluation board for the Fujitsu 32-Bit FRlite Flash microcontroller MB91F267N. The board allows the designer immediately to start with the software development and evaluation of low voltage three-phase motor control applications before his own final target system is available.
1.3 General Description The MotorKit-91F267-MC supports the 32bit MB91F267(N) Flash microcontroller. The board is supplied with a socketed 4MHz crystal as the main oscillation clock. Using the internal PLL of the µC, internal clock rates up to 32MHz can be achieved.
4 Programming the internal Flash In order to program the Flash ROM asynchronously via UART0, the tool “Fujitsu Flash MCU Programmer for FR” can be used. This tool is available free on the Fujitsu Micros CD-ROM or Web Site (http://mcu.emea.fujitsu.com/mcu_tool/software.htm) The following procedure must be followed to perform Flash Programming: 1.
MotorKit-91F267-MC User Guide 9 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com/ Linear Products: Power Management, A/D and D/A Converters http://www.fme.fujitsu.com/products/linear/start.html...