Hitachi AJ-S60TXP User Manual page 12

Installation Guide (continued)
The base plate is placed on the packaging foam
on the top of the washer.
1
Lay the unit down slowly.
Lay the unit down on some corrugate paper to prevent
damage.
2
Align the hook on the base plate with
the square hole on the chassis and insert
it, then tighten the screw.
Connecting the water supply hose to the main unit
Firmly tighten the union nut
when connecting the water
supply hose to the main unit.
•
Loosely tightened union nut will cause water leakage.
•
When removing the hose, unscrew the union nut fi rst.
12
installation of the bottom plate
How to Install the Water Supply Hose
(Suitable in AJ-S60TX)
AJ-S60TX
Back
Corrugate paper etc.
Screw
(Suitable in AJ-S60TXP)
AJ-S60TXP
Back
Screw
Extended the water supply hose
Please use optional extension tube for
lengthening the water supply hose.
Three standard of extension hoses (1m,2m,3m)
are available.Please inquire distr ibutors for
extending the water supply hose.
1m 2m 3m
The water
drainage hose
Front
Front
Corrugate paper etc.