Hitachi AJ-S60TXP User Manual page 33

In "Blanket" process
Put the washing cap into the basket, hold the central circle, and pull it right beneath the bal-
ance ring.
Do not clip the clothes when installing the washing cap.
washing cap
Taking out the washing cap
Push the washing cap
1
down.
Push
Adjustment of the position and height of the washing cap
In "Wool" process
•
The installation position (height) of the washing cap shall be determined by the type, size, and thickness of the
washings. Please install the washing cap at a height where it could press against the washings slightly.
( )
•
There is a sign of protrusion on the interior wall of the basket, indicating where the installation position shall
be, which can be used as reference at the time of installation.
•
For light and thin clothes such as blouse, towels can be put into the basket to adjust the height of the washings and avoid
oblique of the washing.
washing cap
balance ring
Attention
•
Do not add any clothes on the washing cap after the
installation of the cap.
central circle
As shown in the fi gure
2
hold on to the center
part and bend it to the
arrow direction.
Bend
Washing waterline washing capacity
less than 1.2kg
30L ~ 25L
1.2kg
Pull the washing cap
3
out.
Pull the washing
cap out
Attention
•
Do not add any clothes on the washing
cap after the installation of the cap.
33