NEC Univerge SV8100 General Description Manual page 105

UNIVERGE SV8100
Softkeys
Each display telephone provides interactive Softkeys for intuitive feature access. It is
no longer necessary to remember feature codes to access the telephone advanced
features because the function of the Softkeys change as the user processes calls.
Additional options allow you to fine tune the multiline terminal volume levels for
handset receive and transmit, speaker volume, ringer and handset volume, and
headset volume levels. You can also customize the point at which the built-in
speakerphone switches from transmit to receive; a boon for noisy environments. The
display telephones also have a contrast control for the LCD display.
Speed Dial – System/Group/Station
Enhancements
Improved Cursor Key operation (Version 3000 or higher software).
Speed Dialing gives an extension user quick access to frequently called numbers.
This saves time, for example, when calling a client with whom they deal often.
Instead of dialing a long telephone number, the extension user dials the Speed
Dialing code.
There are three types of Speed Dialing: System, Group and Station. All co-workers
can share the System Speed Dialing numbers. All co-workers in the same Speed
Dialing Group can share the Group Speed Dialing numbers. Station Speed Dialing
numbers are available only at a user extension. The system has 2000 Speed Dialing
bins that you can allocate between System and Group Speed Dialing and a maximum
of 65 Speed Dialing Groups are available. Each extension has 10 Station Speed Dial
bins.
Each Speed Dialing bin can store a number having up to 24 digits.
When placing a Speed Dialing call, the system normally routes the call through Trunk
Group Routing or ARS (whichever is enabled). Or, the user can preselect a specific
trunk for the call. In addition, the system can optionally force System Speed Dialing
numbers to route over a specific Trunk Group. User preselection always overrides
the system routing.
System Bins Limited to 1000 with Speaker Key or
Though there are 2000 Speed Dialing bins available in the system, once
programmed, these bins can currently only be dialed using the Directory Dial feature
(Press Directory key + SYS softkey + use arrow keys to locate number, or enter the
Speed Dial bin name + Speaker to place call.)
The Speaker and service code
Dial System bin number.
General Description Manual
2 operations are not available for any 4-digit Speed
#
Issue 5.02
2 Service Code
#
2 - 63