Table 5-3 Sv8100 Maximum 9.5" Gateway And 19" System Capacities - Blades - NEC Univerge SV8100 General Description Manual

UNIVERGE SV8100
Table 5-2 9.5" Base and Expansion Maximum System Capacities – Chassis
Hardware
Number of Slot(s) for
Interface Package
Expansion:
PZ-BS10
3-port Expansion Board for
Controlling Chassis
PZ-BS11
1-port Expansion Board for
Expansion Chassis
Battery:
CHS LARGE BATT BOX
(External Battery Box)
CHSGW SMALL BATT
BOX
(Small Battery Box)
Power Supply:
MPS7101
1.2
General Description Manual
9.5" Base
+
9.5" Base
Expansion
with CPU
3 Slots 5 Slots
1 1
1 1
1 1
1 1
1 1
System Blade Capacities
Table 5-3 SV8100 Maximum 9.5" Gateway and 19" System Capacities –
Blades on page 5-6 and
Expansion System Capacities – Blades on page 5-8
number for each blade that can be installed in a system.
This is determined by the maximum blade configuration allowed. When
installing single line sets, DISA, or tie lines, CPU circuits must be allocated for
DTMF receivers. To install single line sets with CO/PBX line access, or when
installing immediate-start tie lines, CPU circuits must be allocated for dial tone
detection.
9.5" Base
9.5" Base
+
+
Expansion
Expansion
without
x4
CPU
6 Slots 23 Slots
1 1
1 3
1 4
1 4
1 4
Table 5-4 SV8100 Maximum 9.5" Base and
Issue 5.02
Networked
Chassis Comments
(NetLink)
– –
– –
16 x (1+3) –
16 x (1+3) –
– 1 is factory
installed with each
chassis
show the maximum
5 - 5