NEC LT265 Network Manual page 30

7. Setting the LAN Setting of Projector
Setting LAN
1
Select "Profiles".
"Profile 1" or "Profile 2" can be stored in the memory of the projector as the setting of LAN when
the LAN port of the projector is used.
<1> Press the
<2> Use the
the
2
Set "DHCP".
Check this check box if the network to which the projector is to be connected automatically
assigns the IP address via the DHCP server.
<1> Press the
the
A check mark will be placed.
•
To clear the check box, press the
•
If "DHCP" is checked, move the highlight to "Reconnect" and press the
after making "DNS Configuration".
•
If "DHCP" is not checked, input "IP Address", "Subnet Mask", "Gateway", and "DNS Con-
figuration" as necessary. After each item has been set, move the highlight to "Reconnect"
and press the
28
button once to highlight the "Profiles" field and press the
button.
button to highlight "Profile 1" or "Profile 2", and press
button.
button once to highlight the "DHCP" check box and press
button.
button.
button once again.
button