Pc Control Utility 3.0; Connecting Projector - NEC LT265 Network Manual

5. PC Control Utility 3.0

5
Press the
If the wired LAN is used, select the "LAN Built-in" tab.
6
Write down the IP address displayed on the screen.
In this example, the IP address is "192.168.100.10".
7
Press the
The on-screen menu will be closed.

Connecting projector

Click Windows [Start] → [All Programs] → [NEC Projector User Supportware 2]
1
→ [PC Control Utility 3.0] → [PC Control Utility 3.0], in that order.
PC Control Utility 3.0 will be started and a window confirming connection with the project will be
displayed.
If the personal computer has been previously connected to a projector, the window for
connecting the projector is closed and then the tool bar is displayed (
70
button four times to highlight the "LAN PC Card" tab.
button twice.
2 Click
page 72).