1. Image Express Utility 2.0
"
This section explains the following three cases as examples of operating Image Express
Utility 2.0.
(1) Transferring images to the projector
(2) Holding a conference
(3) Participating in a conference
For the major functions of Image Express Utility 2.0, refer to "1. What You Can Do with User
Supportware 2" in the chapter "Preparation" (
1-1. Sending Images to Projector
Connecting projector
1
Turn on the power to the projector for which LAN has been set.
2
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware 2]
→ [Image Express Utility 2.0] → [Presenter], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your personal computer will be displayed.
3
Select the network equipment that is to be used and click [OK].
If network equipment of wireless LAN is selected, the confirmation window for "Easy Connection
settings" will be displayed.
If wired LAN is selected, proceed to step
1. Image Express Utility 2.0
page 6).
5
.
45