Toro ProCore Processor Service Manual page 85

Removal (Figs. 4, 5 and 6)
1. Park ProCore Processor on a level surface with the
Processor fully lowered. Make sure that Processor en-
gine is off. Remove key from the ignition switch. Chock
wheels to prevent movement of the machine.
2. Remove drive belt cover to gain access to drive belt
and other drive components. Make sure that tinnerman
nuts remain positioned correctly on frame brackets for
assembly purposes.
Installation (Figs. 4, 5 and 6)
1. Position belt cover to machine and secure with re-
moved fasteners.
ProCore Processor
FRONT
RIGHT
2
3
2
3
1
1. Chopper drive belt cover
2. Cap screw
3. Washer
4
3
2
4
1. Brush drive belt cover
2. Cap screw
Page 6 - - 9
4
2
3
3
2 5
3
Figure 5
4. Tinnerman nut
5. Corner shaft belt cover
2
FRONT
3 RIGHT
1
2
3
Figure 6
3. Washer
4. Tinnerman nut
Chassis