Ceiling Type - Toshiba RAV-SM404MUT-E Service Manual

10-3. Ceiling Type

∗∗∗ ∗∗∗ ∗ ∗ ∗ ∗ ∗
∗∗∗ ∗∗∗ ∗∗∗
RAV-SM CT
Be sure to turn off the power supply or circuit breaker before disassembling work
No. Part name

Suction grille 1. Remove the screws of air intake
2. Slide the suction grille fixing knobs
3. Under the condition of the suction
‚
Side panel 1. Open the suction grille.
2. After removing the side panel
ƒ
Electrical 1. Remove the suction grille.
parts box
2. Loosen the set screws
3. Remove the electrical parts cover.
4. Remove the set screws
5. Remove the electrical parts box.
In this time, remove connectors of TA
sensor, TC sensor and TCJ sensor if
necessary.
Procedure
grille fixing knob on a side of each
filter.
(2 positions) toward the arrow
direction of left figure, and open
the suction grille.
grille opened, push the hook
section of hinges (2 positions) at
the rear side, and then pull out the
suction grille.
screws (2 positions), slide the side
panel forward and then remove it.
(2 positions) of the electrical parts
cover.
(2 positions) of the electrical parts
box.
Hinge
Suction grille
fixing knob
Side panel
Slide forward.
Electrical parts cover
Screws
(Fixing electrical parts cover and box)
Screws
(Fixing electrical parts box and main unit)
– 100 –
Remarks
Pull out suction grille
while pushing hook.
Suction grille
Protector
Level flap
Electrical parts box Electrical parts box
3 -2
3 -3
3 -4
3 -5