Toshiba RAV-SM404MUT-E Service Manual page 93

No. Part name
1. Detachment
Bell mouth
7
1) Perform work of procedure 1 -1.
2) Take off the lead wires of the drain pump, float
3) Take off fixing screws of the bell mouth.
2. Attachment
1) Mount the bell mouth with screws.
2) Perform wiring as original before being
NOTE)
Pinch lead wire of the drain pump and float switch
with lead wire fixing claws of the bell mouth and
perform wiring along the guide.
1. Detachment
Turbo fan
8
1) Perform work of procedure 7 -1.
2) Take off the nut (M6 nut 1 pc.) of the turbo fan.
NOTE)
Use a box wrench for attachment and detachment of
the turbo fan. If using a monkey wrench etc, the other
parts may be damaged in work.
2. Attachment
1) Insert the turbo fan into the fan motor so that
NOTE)
Tightening torque of turbo fan: 5.9 ± 0.6N.m
Apply looseness-preventing agent to the nut after
tightening.
Procedure
switch, and fan motor from the bell mouth.
(Ø4 × 10, 4 pcs.)
(Ø4 × 10, 4 pcs.)
removed.
boss of the turbo fan matches with cut surface
of the fan motor, and then tighten it with nut.
Fan motor fixing
M6 nut
Turbo fan
– 93 –
Remarks
Fixing claws
for lead wires Bell mouth
4 screws Fixing claws
for lead wires
Drawing-out port of
fan motor lead wire