Panasonic AG-MX70E Operating Instructions Manual page 54

[Setup] initial setting screen
The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the
settings are acceptable, enter them using [Enter], and return to the direct pattern settings.
Example of transition
If the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will not
be stored in the memory.
The settings of six key patterns and seven transitions patterns are stored in the memory. The edges and effects of each of
the patterns are also stored.
Example of key pattern
Key patterns 3xxx, 4xxx and 5xxx as well as key learn patterns 9000 to 9019 can be assigned to direct key pattern buttons.
Transition patterns 0xxx, 1xxx and 2xxx can be assigned to direct transition pattern buttons.
The factory settings are the patterns displayed.
Pos. X 128 Y 128
Z 196
Event ME Time
00 10:00
E
Direct Pattern Transition
Modify
Comp
Pattern
Edge Hard
Effects
Off
R1 R2
Pos. X 128 Y 128
Z 196
Event ME Time
00 10:00
E
Direct Pattern Key
Pattern
Edge Hard
Crop
A
6
Effects
Off
3D Rotate
Modify 0
R1 R2
Pattern
2001
F
Enter to EXIT
Off
Width Color
0 White
R3 R4
Pattern
6301
F
Enter to EXIT
Width Color
0 White
A A 8 8
2 12
Time
0
R3 R4
53 (E)
INT
Wht
R5
INT
Wht
K Level
255
7 7
12
Light
On
TransF
255
R5