Panasonic KX-TDA50 Installation Manual page 121

4. a.
Enter the Installer Level Programmer Code (default: INSTALLER).
Note
There are 2 other Programmer Codes with limited authorization: Administrator Level (default:
ADMIN), and User Level (default: USER).
b.
Click OK.
5. Click Connect.
6. a.
Select KX-TDA50 from PBX Model.
b.
Select the USB tab.
Note
To connect to the PBX via USB, the KX-TDA USB driver must be installed on the PC, as
explained above in "Installing the Maintenance Console".
c.
Enter the system password for installer (default: 1234).
d.
Click Connect.
7. Follow the instructions of the Quick Setup wizard and assign the basic items (Quick Setup).
You may now begin programming the PBX.
Notice
•
During a long programming session, it is highly recommended that you periodically save the system
data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the system is reset for
some reason, all the system data in RAM will be lost. However, if system data has been saved to the
SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before
resetting the PBX or turning off the power, or (2) exit the Maintenance Console so that the PBX
automatically saves the system data.
•
When programming PBX data which can be displayed on a proprietary telephone (PT) (extension
names, group names, System Speed Dialing names, etc.), it is possible to enter characters which
Document Version 2010-11
3.3.1 Installing and Starting the Maintenance Console
Installation Manual 121