Attaching A Ferrite Core - Panasonic KX-TDA50 Installation Manual

2.2.8 Attaching a Ferrite Core

2.2.8 Attaching a Ferrite Core
A ferrite core must be attached when an RJ45 connector is connected to the SIP-GW4 or IP-EXT4 card.
Attaching to an RJ45 Connector
For SIP-GW4/IP-EXT4 Cards
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 5
cm (1-15/16 in) away from the connector. The ferrite core is included with the card.
(1-15/16 in)
54 Installation Manual
5 cm
Document Version 2010-11